Environmental Building Board
Fire-proof Board
Sound Resistance
Termite Resistance
Magnesium Oxide Board Thickness Selection Guide
Magnesium Oxide Board Thickness Selection Guide: Build a Better RFQ
A request for an MgO board by thickness alone is rarely ready for a useful comparison. The same number can be attached to a Wall Lining, a ceiling, a partition, or a project where the board face, edge, support context, finish, and requested evidence still need to be defined. A buyer who records those inputs early can compare like with like instead of receiving several quotations that use the same thickness word but describe different items.
Senchen’s Magnesium Oxide Boards (MgO Boards) are made with magnesium oxide, magnesium chloride, and glass fiber. A requested thickness is a project-specific configuration item; it does not make one board suitable for every project.
This guide shows how to turn a broad thickness enquiry into a configuration brief that a purchasing, design, and supplier team can all review.
Start with the building task, not the number
The first question is where the board belongs in the work package. The identified application range includes interior/exterior wall decoration, ceiling, and partition projects. Each label should be expanded into a short project description before a thickness is requested.
For example, record whether the board is being considered for an interior wall finish, an exterior-facing decorative area, a ceiling, or a partition. Then add the support or assembly context supplied by the project team. This is not a substitute for project engineering; it is a way to prevent an RFQ from silently assuming an assembly that has not been agreed.
Use this opening check:
- What is the board’s intended task in the project?
- Which drawing, room area, elevation, or work package identifies that task?
- What board face and edge direction does the buyer want to review?
- What dimensions and thickness should be quoted, and which of those points still require confirmation?
- Does the requested finish or exposure context change the sample that should be compared?
When the answer is “we only know the thickness,” the next action is to collect the missing project inputs rather than selecting a presumed standard item.
Turn a requested thickness into a comparison framework
A requested thickness gives the buyer a clear line to organize, but it should not be treated as a performance ranking or a universal choice chart. A stronger RFQ asks suppliers to align a proposed board with the project task and then identify any configuration points that remain open.
| RFQ field | What to state | Why it matters in the comparison |
|---|---|---|
| Product family | Magnesium Oxide Boards (MgO Boards) | Keeps the enquiry tied to the correct board family. |
| Requested thickness | Project requirement or “to confirm” | Makes the commercial line specific without assuming project suitability. |
| Intended task | Wall decoration, ceiling, partition, or another described project task | Gives the thickness request a usable context. |
| Board dimensions | Requested length and width, or “to confirm” | Avoids comparing unmatched board formats. |
| Face and edge | Visual direction and edge expectation | Helps the sample and quotation describe the same item. |
| Assembly context | Project drawing reference and support information available to the buyer | Shows what must be checked before release. |
| Evidence request | Documents, samples, or other evidence required by the project | Separates a request from an unsupported assumption. |
The table is deliberately a buying tool, not an installation prescription. If the board configuration changes after a quotation arrives, revise the brief and ask for the revised item to be confirmed in writing.
Use a sample to test the quotation line
A sample is most helpful when it represents the proposed configuration. Ask the supplier to identify the sample against the same product family, requested thickness, dimensions, face, and edge information that appear in the RFQ. A sample that is simply called “Mgo Board” may not be enough to resolve a project-specific comparison.
During the review, a buyer can keep the check practical:
1. Match the sample label or supplier identification to the requested Magnesium Oxide Boards (MgO Boards) line. 2. Compare the requested thickness and dimensions with the item being discussed; record any value that still needs confirmation. 3. Review the visible face and edges against the project’s intended visual or handling direction. 4. Keep drawings, finish references, and evidence requests with the sample record. 5. If the proposed item changes, issue an updated sample request instead of treating the original sample as approval for the new configuration.
This creates a traceable handoff from selection to quotation. It also makes it easier for a distributor or importer to explain later why a board was selected for a specific work package rather than purchased on a thickness label alone.
Questions that should stay open until the project is defined
Some questions are configuration-specific and should remain visible in the RFQ rather than being filled with generic assumptions. Examples include the precise board size and thickness, the face or finish required, edge treatment, support or assembly conditions, order quantity, packing request, destination, and project documents.
The same is true for any performance, certification, test, compatibility, price, delivery, or warranty requirement. Ask for the evidence that applies to the proposed item and project. Do not convert a general material discussion into a claim about a configuration that has not yet been confirmed.
For projects that need a different board surface direction, the decorative MgO board product page can help keep the product-family discussion separate from a finish-specific sample request. A fiber cement board comparison should likewise be treated as a different product-family enquiry, not as an interchangeable quotation line.
A compact MgO board thickness RFQ template
Copy and complete the following before requesting a quotation:
> Product family: Magnesium Oxide Boards (MgO Boards) > Project task: [wall decoration / ceiling / partition / other described task] > Requested thickness: [project requirement, or confirmation requested] > Requested dimensions: [length × width, or confirmation requested] > Face and edge direction: [describe] > Project reference: [drawing, room area, work package, or photo reference] > Quantity and destination: [describe] > Sample and evidence requested: [describe] > Points requiring supplier confirmation: [list]
That format gives the supplier enough context to respond to the actual buying question while making the remaining decisions explicit. When the support, finish, or project task changes, send a revised version rather than relying on an earlier response.
Request a configuration review before quotation comparison
For an MgO board thickness enquiry, begin with the intended application and requested thickness, then request a review of the actual configuration. Send the project task, dimensions, face and edge direction, sample needs, quantity, destination, and applicable evidence requirements through the Senchen contact page. That is the most practical way to turn a broad thickness request into comparable quotation inputs.
FAQ
Is there one correct magnesium oxide board thickness for every project?
No. The intended wall, ceiling, or partition task and the project’s configuration inputs need to be reviewed before a requested item is confirmed.
What should a magnesium oxide board sample represent?
It should be matched to the proposed product family and the requested thickness, dimensions, face, edge, and project brief. Record any point that remains subject to confirmation.
What if the project has not finalized a thickness?
State the intended project task, the assembly information available, and the dimensions or thickness questions that need configuration review before quotation comparison.